1231 Jig Dancer Blades (10pk)

Jig Dancer Blades available in the traditional stainless steel finish, metal plated or must have painted colors! Stamped from .020 stainless. Sold 10 to a pack.

• We recommend using item 4222 (sizes 1 or 2), Duo-Lock Snaps with our jig blade dancer lures.
• Blades measure 7/8"wide x 1 1/8" length
• This blade is also available with a bend, see item numbers 1230 and 1232.
  

• Split Ring Pliers (Essential for opening the rings without bending them out of shape)
• Long Nose Pliers (For holding components and closing snaps)

• Bladed Swim Jig Head: Choose your preferred weight (typically 3/8 oz or 1/2 oz) with a horizontal line tie/eyelet.
• Jig Dancer “Shaker” Vibrating Blade: These are the specialized vibrating blades that give the bait its signature thump and side-to-side wobble.
• Split Ring (Size 2 or 3): Connects the blade to the jig head.
• Duo-Lock Snap (Size 2 or 3): Attaches to the front of the blade where you tie your fishing line.
• Silicone Skirt: Hides the hook and flares out in the water to mimic baitfish.
• Soft Plastic Trailer (Optional): A swimbait, craw or fluke-style trailer to add bulk and action.

1. Open your Duo-Lock Snap using your long-nose pliers.
2. Feed the snap through the top two holes of the Jig Dancer Shaker Blade from the back side.
3. Snap it firmly shut. This loop is where you will eventually tie your fishing line when you go fishing.

1. Take your Split Ring Pliers and wedge the tooth into the Split Ring to separate the wire strands.
2. Feed the open split ring through the single bottom hole of your shaker blade.
3. Rotate the split ring with your pliers until it clears the hole completely and sits loosely in the blade.

1. Open the split ring with your Split Ring pliers and slide the horizontal eyelet (line tie) of your jig head into the gap.
2. Crucial Blade Alignment Check: Ensure that the front side of the blade is facing forward (convex side facing forward). This creates the side-to-side hunting action.
3. Spin the split ring all the way through until it clicks shut, securely trapping both the blade and the jig head eyelet together.

1. Pro-Tip: Rub a tiny bit of chapstick or lip balm onto the collar of the jig head. This acts as a harmless lubricant so the skirt slides on smoothly without tearing.
2. Grab your silicone skirt, keeping the strands even, and slide the rubber collar of the skirt over the hook point.
3. Push it all the way up the hook shank until it seats firmly on the jig head's collar. Give the strands a gentle tug to ensure they flare out evenly around the hook.